جديد ماكينة نثر الأسمدة السائلة SKATE 120 drop tube spreader unit

Specification
The pre-flow pressure must be at least 180 bar on the tractor (min. 8,000 l compressor or 4,000 l pump required
no hose holder required for installation)
optimum weighted discharge arm
welded construction
galvanized
bend and twist resistant
direct discharge of manure through the hoses to the ground
automatic hose inflation - no dripping (drip-free system)
low-force spreading to minimise odour and emissions
1000 times proven
overpressure protection
low wear
1 control device or loadsensing and a dual action spreader pusher required on the fertiliser hopper
Facilities
Working width 12 000 mm
hydraulic folding
Slurry spreading auger
bottom trough and auger of stainless steel
with external hydraulic motor
Outlet opening (bore) of the screw trough 21 mm
Hose distance 250 mm
Fixed support arm
Lap springs (for accurate slurry discharge to the soil)
Screwed hornets
Transport insurance
Comfort control with control panel
sequence switching and pulley rotation direction change
Mechanically opening stone grab
Anchorage points for mounting on Fliegl steel tank
including bracket
for connection to H-frame
top coupling
T-piece behind the tank (if an additional standard manifold is used
a left and right hand disconnect slide lock is required)
tablecloth preparation